Godox V1 LCD and Control Board Replacement
This prepaid repair service replaces the combined LCD and control-board assembly in a Godox V1 or compatible Flashpoint Zoom Li-on X R2 round-head speedlight.
Important: Select the option matching your camera system: Canon, Nikon or Sony. This repair is for the original V1 and does not cover the V1Pro or V100.
This repair is appropriate for:
- A cracked or physically damaged LCD
- Black spots, missing sections or pressure damage on the display
- A dim, distorted, flickering or unreadable LCD
- A damaged or loose power switch
- A no-power condition when the switch or control-board assembly is the cause
The LCD and control board are part of the same assembly. This is therefore the correct repair when either the display or the integrated power-switch section of the control board has failed.
A no-power condition may also be caused by the main drive board. If our inspection shows that a different repair is required, we will contact you before performing additional work.
What the repair includes
- Replacement of the combined LCD and control-board assembly
- Installation and complete functional testing
- Testing of the display, controls, power switch and flash operation
- A repair report when the work is complete
- A six-month warranty covering the replaced assembly
- Return shipping from MoLight to you
The repair warranty applies to the LCD and control-board assembly replaced during this service. It does not cover unrelated components or a different failure that may develop later.
What to send
Send only the main Godox V1 or compatible Flashpoint speedlight body.
- Do not send the battery
- Do not send the charger
- Do not send the case, stand, modifiers or other accessories
- Do not send additional items unless we specifically request them
Pack the speedlight securely, paying particular attention to protecting the round flash head and LCD. Use a shipping service that provides tracking.
You are responsible for shipping the speedlight to MoLight. The shipping charge collected with your repair order covers return shipping to you.
How the repair process works
- Select the option matching your camera brand, add the repair to your cart and complete payment.
- Print your order confirmation showing the six-digit order number.
- Place the order confirmation inside the package with your speedlight. Please include a note describing the display, power-switch or no-power problem and any other information we should know.
- Ship the speedlight to the MoLight Repair Center using a shipping service that provides tracking.
- We will send you an email confirming that your repair has been received.
- We will inspect the speedlight, replace the LCD and control-board assembly, and test its operation.
- When the repair is complete, we will email your repair report and return the speedlight to you.
Repair turnaround
Turnaround begins when your speedlight arrives at MoLight. Please review the current Repair Queue Status on the main repairs page before ordering. Orders containing multiple speedlights may require additional time.
We will contact you if the no-power condition is caused by a different component or if additional work is required.
Repair shipping address
MoLight Repairs
707 W Lexington Parkway
DeForest, WI 53532
