Godox AD200 and AD200Pro Radio Receiver Repair
This prepaid repair service replaces the internal radio receiver in a Godox
AD200 or AD200Pro flash.
Important: This service does not cover the AD200Pro II, which
uses different internal components.
This repair is appropriate for:
- The flash powers on but does not fire from a compatible Godox transmitter
- The wireless channel and group settings have been confirmed
- The wireless ID is disabled on both devices or correctly matched
- Other flashes respond to the same transmitter, but this flash does not
Before ordering this repair, confirm that the transmitter and flash are set to
the same channel and that the selected flash group is enabled on the
transmitter. Also confirm that the wireless ID settings are either disabled on
both devices or set to the same number.
If the flash still does not respond after these settings have been checked, the
internal radio receiver may have failed. If our inspection shows that a
different repair is required, we will contact you before performing additional
work.
What the repair includes
- Replacement of the internal radio receiver component
- Testing with a compatible Godox wireless transmitter
- Complete flash operation and function testing
- A repair report when the work is complete
- A six-month warranty covering the repaired radio receiver
- Return shipping from MoLight to you
The repair warranty applies to the radio receiver repaired or replaced during
this service. It does not cover unrelated components or a different failure
that may develop later.
What to send
Send only the main AD200 or AD200Pro flash body.
- Do not send the battery
- Do not send either flash head
- Do not send the transmitter
- Do not send accessories unless we specifically request them
Pack the flash securely and use a shipping service that provides tracking.
You are responsible for shipping the flash to MoLight. The shipping charge
collected with your repair order covers return shipping to you.
How the repair process works
- Add this repair service to your cart and complete payment.
-
Print your order confirmation showing the six-digit order number.
-
Place the order confirmation inside the package with your flash. Please
include a note describing the wireless problem, the troubleshooting steps
you have already tried, and any other information we should know about the
flash.
-
Ship the flash body to the MoLight Repair Center using a shipping service
that provides tracking.
-
We will send you an email confirming that your repair has been received.
-
We will inspect the flash, replace the radio receiver if appropriate, and
test its wireless operation.
-
When the repair is complete, we will email your repair report and return
the flash to you.
Repair turnaround
Turnaround begins when your flash arrives at MoLight. Please review the current
Repair Queue Status on the main repairs page before ordering.
Your tracking number is the best way to monitor the package while it is in
transit. After the repair arrives, we will send you an email confirming receipt.
We will contact you if we discover a different problem or need additional
information. Otherwise, you will hear from us again when the repair is complete.
Repair shipping address
MoLight Repair
707 W Lexington Parkway
DeForest, WI 53532
